End Grain Cutting Boards-How to Make Them

A give-up grain slicing board is a cutting board made from wooden pieces’ ends. This building approach affords numerous advantages compared to different sorts of reducing boards. If you want to know about How to oil a cutting board. Read the article.

 Firstly, the quit grain floor is extra forgiving to knives, decreasing the possibility of dulling the blades. The special sample of the stop grain also provides splendour and visible attraction to the cutting board.

Materials and Tools

Before making your stop grain slicing board, you will want to acquire the integral substances and tools. When deciding on the wood, it is vital to pick out a hardwood recognized for its sturdiness and resistance to moisture.

Popular alternatives encompass maple, walnut, and cherry. Additionally, you will want equipment like a desk saw, a mitre saw, a planer, a biscuit joiner, and clamps.


Once all the substances and equipment are ready, you can prepare the timber for your quit grain-reducing board. Begin by measuring and slicing the wood into small strips of equal length.

 These strips will structure the character portions of the give-up grain surface. After cutting the strips, you will want to glue them collectively using a biscuit joiner and clamps.

 This step requires precision to ensure a sturdy bond between the wooden pieces. Once the glue has dried, you can pass it on to sanding the board to reap an easy and even surface.


After the sanding process, it is crucial to follow a food-safe end to defend the quit grain slicing board and decorate its appearance.

 Many finishes are on hand, specially designed for cutting boards, such as mineral oil or an aggregate of mineral oil and beeswax.

 Apply the chosen end evenly and enable it to dry according to the manufacturer’s instructions. This step will furnish a defensive layer and make the wood extra resistant to moisture and stains.

Maintenance and Care

To ensure the durability of your cease grain slicing board, acceptable protection and care are necessary. Regular cleansing and sanitizing are vital for retaining the panel free from bacteria. If you want to know about How to apply mineral oil to cutting board. Read the article.

 Mild dish cleaning soap and heat water can be used for normal cleaning, while homemade vinegar and water can disinfect the board.

It’s essential to avoid soaking the board or putting it in the dishwasher, as immoderate publicity to water can motivate warping or splitting.

After cleaning, dry the board earlier than storing it in a cool and dry place.


How is a end grain-cutting board made?

 A give-up grain- cutting board is made by cutting wood planks into small strips and then glueing them collectively so that the reduced ends of the timber are going upwards.

This creates a long-lasting and visually attractive floor for chopping.

How do you make an edge grain board?

To make an area grain- cutting board, wood planks are joined collectively facet through side, with the lengthy grain of the timber going upwards.

This development technique offers a sturdy slicing floor; however, it is no longer as forgiving to knives as a give-up grain board.

 What is the best thickness for an end grain cutting board?

The perfect thickness for a quit grain cutting board typically tiers between 1.5 to two inches. This thickness ensures sturdiness and balance whilst additionally permitting the floor to take in the effect of knife edges by cutting and inflicting immoderate wear.

What tools do you need to make an end grain-cutting board?

 To make a grain cutting board, you will need a range of equipment together with a desk noticed to reduce the wood planks, a jointer to create clean edges, a planer to attain regular thickness, a mitre noticed or round saw, clamps for glue-ups, a router for ending touches, sandpaper for refinishing, and food-safe timber glue to maintain the entirety together.

 What is the disadvantage of a end grain cutting board?

 The foremost drawback of a cease grain cutting board is that it requires greater preservation compared to different sorts of reducing boards.

 It can be more susceptible to creating deep knife marks and might require normal sanding and refinishing to keep its clean floor intact.

Additionally, a give-up grain board can be more costly to make and purchase due to its development method.


In conclusion, making your own give-up grain slicing board can be a lucrative woodworking venture, resulting in a long-lasting and lovely kitchen tool.

With the proper materials, tools, and a step-by-step approach, you can create a reducing board that will provoke your company and yourself. If you want to know about What oil for cutting board. Read the article.

 Whether you are a professional woodworker or a novice, this challenge is worth exploring. Happy crafting!

Leave a Comment